inkl. 20% MwSt.
Introducing the PinJack! – a must-have tool for pinball enthusiasts that saves your back during machine adjustments. This versatile tool is compatible with any pinball machine equipped with factory leg levelers and has a maximum lift weight of 220 pounds. While we recommend using it for loads under 200 pounds for frequent use, rest assured that it can handle the full weight. It’s important to note that squeezing the metal grip bars becomes more challenging and may cause discomfort in your hands once you exceed 200 pounds. Additionally, the tool requires regular maintenance by lubricating the center metal bar on the backside.
The PinJack! offers exceptional flexibility. It can be used at any angle on a pinball leg, even in tight spaces with multiple pinball games against the wall. For efficient adjustments, you can even use two PinJacks! simultaneously to adjust the pitch and level of the back of the game. With the PinJack!, you’ll complete the task in under 2 minutes.
Please remember that if you have a rubber floor foot protector installed, it must be temporarily removed before adjusting the pinball machine. Once you’ve made the necessary adjustments, you can safely reinstall the rubber floor foot protector. Experience the convenience and efficiency of the PinJack! for effortless pinball machine adjustments while keeping your back protected.
The PinJack® lifts pinball machines by raising the leg of the machine without using your physical body to do the job anymore. You simply align the metal forks to align with factory leg of the pinball machine and squeeze the PinJack® handle to raise the leg off the ground. This cantilever weight is about 110 to 150 pounds when raised since the other three legs are still on the ground. Once the pinball leg is raised you can then spin the metal footplate of the pinball leg to adjust the height of your game. Ideally you would want a leveler device on top of the pinball glass in eye sight view while raising and adjusting the legs of the game so you can do the job in seconds. You can do one leg at a time on the front legs of a pinball machine and see the leveler pretty easily if it’s resting on the glass top. The back legs take a little longer with a single PinJack® so we recommend using two.
With two PinJacks® you can raise both legs in the back of your pinball machine at the same time to adjust the pitch and level at the same time. This allows you to quickly move on to the next machine and saves you from having to turtle underneath the machine. Also, you won’t need two people to adjust a pinball machine anymore. You can use the two PinJacks® to do what it would take two people normally to do. Raise one leg and then check the leveler. Then raise or lower the other leg to get the pitch correct. You may find it useful for other small devices that need lifting, but it is designed specifically for pinball machines and may not hold up if you are constantly lifting 220+ pound appliances or devices cantilevered. Yes, it will bend or break at some point under constant max lifting. With proper use of lifting one leg of a pinball machine at a time it should last you years since its 110 pounds cantilevered weight and the MAX weight is 220 pounds before the internal metal mechanism will break.
PINJACK – Safety Warranty Responsibility & Liability Disclaimer
Designed by Press On Products LLC
Save your back – get the PinJack
Easy to use on all pinball games to adjust your level & pitch
How to adjust the pitch and level of your pinball game with PinJack
How to slowely release it to the ground to avoid slamming your pinball game onto the ground
Review Video from Cary Hardy